2026 Wacker Neuson RD7 Walk-Behind Roller RD7Afb HRC

Information

2026 Wacker Neuson RD7 Walk-Behind Roller RD7Afb HRC

The RD7 walk-behind dual-vibration roller delivers excellent performance in both soil and asphalt compaction - thanks to the optimally integrated frequency and two vibration stages. As a result, the roller is characterized by its ergonomically arranged operator controls, such as, the engine rpm adjuster attached to the center pole. Even the easy, tool-free access to all service points makes the RD7 a simple and economical solution for every construction site.

Features may include:

All control elements are located directly on the guide handle

The operator has complete control of the machine at all times from his operating position and does not have to move around the machine. This means more safety and comfort.

Engine speed adjustment for engines with three positions (Off, Idle, Full Throttle) directly on the guide handle

To start and stop the machine, the operator does not need to leave his position – he has all control elements directly within access. The gas lever is also fixed at three positions, which makes operation very easy and does not require any special experiential knowledge.

Good visibility on fill levels

The hydraulic oil level can be easily read at any time through an inspection window. Refilling is possible without dismounting the steel frame. The water tank level is visible at any time from outside through the slightly transparent tank material.

Ergonomic handle and travel lever with recessed handles

The ergonomic design of the travel lever and guide handle makes guiding the machine convenient.

Two vibration stages for various subbases

To achieve optimal compaction performance on asphalt as well as on soil, the vibration is selectable in two stages: high frequency for soil compaction and low frequency for asphalt compaction. The different vibration stages are reached by changing the exciter speed.

Photos

Highlights

  • Burnsville, Minnesota
  • 2026
  • Wacker Neuson
  • RD7 Walk-Behind Roller RD7Afb HRC
  • Available
  • (guide handle in operating position): 27.5 in | Drum: 25.6 in
  • (guide handle in operating position): 45.7 in

Specifications

  • 2026
  • Wacker Neuson
  • RD7 Walk-Behind Roller
  • RD7Afb HRC
  • Walk Behind Roller
  • Air-cooled single cylnder 4 cycle gasoline engine
  • Honda GX390
  • 23.7 in³
  • Operating performance: 9.7 hp
  • Centrifugal force high: 4,998 lbf | Centrifugal force low: 2,935 lbf | Frequency high: 3,726 Vpm | Frequency low: 2,850 Vpm | Linear force (static) front/rear: 24.2 lb /36.2 in / 23.5 lb / 35.6 in | Linear force (dynamic) front/rear - high: 97.6 lb / 97.6 in | Linear force (dynamic) front/rear - low: 57.3 lb / 57.3 in | Total force Applied - high: 6,542 lbf / 6,510 lbf | Total force Applied - low: 4,479 lbf / 4,446 lbf
  • Travel speed forward max: 2.8 mph | Travel speed reverse max: 1.6 mph
  • Drum diamete: 16.5 in | Side clearance (right & left): 1 in | Curb clearance (right/left): 8.2 in | Amplitude drum: 0.029 in | Gradeability with vibration: 40 % | Gradeability without vibration: 45 %
  • (guide handle in operating position): 93.1 in
  • (guide handle in operating position): 27.5 in | Drum: 25.6 in
  • (guide handle in operating position): 45.7 in
  • 1.58 US gal
  • capacity water: 15.8 US gal
  • Surface capacity max: ft²/h
  • (water tank half full): 1,545 lb / 1,512 lb